• / 叶朝锋 助理教授、研究员
    邮箱: yechf@@shanghaitech.edu.cn
    电话:(021) 20685366
    办公室: 信息学院2-302H室
    专业方向: 电子科学与技术

叶朝锋 助理教授、研究员

电 话:(021) 20685366
邮 箱:yechf@@shanghaitech.edu.cn
办公室:信息学院2-302H室
个人主页:http://psit.sist.shanghaitech.edu.cn/
专业方向: 电子科学与技术
博士毕业院校: 美国密歇根州立大学

研究领域

  • 无损检测方法与技术,包括:前向仿真计算模型开发,面向新应用的新型探头研发,缺陷识别与衍生预测算法研究

  • 新型量子传感器及其应用技术

  • 毫米波、红外波检测与成像

  • 电磁精密测量


个人简历

叶朝锋2016年从美国密歇根州立大学获工学博士学位。2016至2017年间在美国密歇根州立大学电气与计算机工程系从事博士后研究工作。此前2008年至2013年间在清华大学电机工程与应用电子技术系从事教学科研工作,作为团队成员曾获教育部科技成果奖,北京市科学技术奖和清华大学教学成果奖。他的研究兴趣包括:新型无损检测探头研发,缺陷识别与衍生预测算法研究,新型量子传感器及其应用技术,毫米波、红外波检测与成像和电磁精密测量等。


代表性论文

  1. M. Wang, Y. Wang, L. Peng and C. Ye, “Measurement of Triaxial Magnetocardiography Using High Sensitivity Tunnel Magnetoresistance Sensor”, IEEE Sensors Journal, vol. 19, no. 21, pp. 9610–9615, November 2019.

  2. N. Zhang, C. Ye, L. Peng and Y. Tao, “Novel Array Eddy Current Sensor with Three-Phase Excitation”, IEEE Sens. J., vol. 19, no. 18, pp. 7896–7905, September 2019.

  3. C. Ye, Y. Wang and Y. Tao, “High-Density Large-Scale TMR Sensor Array for Magnetic Field Imaging”, IEEE Trans. Instrum. Meas., vol. 68, no. 7, pp. 2594–2601, July 2019.

  4. C. Ye, A. Rosell, M. Haq, E. Stitt, L. Udpa and S. Udpa, “EC probe with orthogonal excitation coils and TMR sensor for CFRP inspection”, Int. J. Appl. Electromagn. Mech., vol. 59, no. 4, pp. 1247–1255, 2019.

  5. Y. Wang, C. Ye and M. Wang, “Synthetic Magnetic Field Imaging with Triangle Excitation Coil for Inspection of Any Orientation Defect”, IEEE Transactions on Instrumentation and Measurement, pp. 1–9, 2019.

  6. C. Ye, A. Rosell and L. Udpa, “Using Magnetoresistive Sensors in Nondestructive Testing”, Mater. Eval., vol. 76, no. 2, pp. 144–154, February 2018.

  7. J. Zhang, T. Gang, C. Ye and S. Cong, “Low sidelobe level and high time resolution for metallic ultrasonic testing with linear-chirp-Golay coded excitation”, Nondestruct. Test. Eval., vol. 33, no. 2, pp. 213–228, 2018.

  8. O. Karpenko, C. Ye and L. Udpa, “Dual frequency fusion for defect signal enhancement in EC-GMR inspecton of riveted multilayer structures”, NDT E Int., vol. 92, pp. 97–103, December 2017.

  9. C. Ye, L. Udpa and S. Udpa, “Optimization and Validation of Rotating Current Excitation with GMR Array Sensors for Riveted Structures Inspection”, Sensors, vol. 16, no. 9, p. 1512, September 2016.

  10. C. Ye, Y. Huang, L. Udpa, and S. S. Udpa, “Novel Rotating Current Probe with GMR Array Sensors for Steam Generate Tube Inspection”, IEEE Sens. J., vol. 16, no. 12, pp. 4995–5002, June 2016.

  11. C. Ye, Y. Huang, L. Udpa, S. Udpa, and A. Tamburrino, “Magnetoresistive Sensor with Magnetic Balance Measurement for Inspection of Defects Under Magnetically Permeable Fasteners”, IEEE Sens. J., vol. 16, no. 8, pp. 2331–2338, April 2016.

  12. C. Ye, Y. Huang, L. Udpa and S. S. Udpa, “Differential Sensor Measurement with Rotating Current Excitation for Evaluating Multilayer Structures”, IEEE Sens. J., vol. 16, no. 3, pp. 782–789, February 2016.

  13. Z. Su, C. Ye, A. Tamburrino, L. Udpa,and S. Udpa, “Optimization of coil design for eddy current testing of multi-layer structures”, Int. J. Appl. Electromagn. Mech., vol. 52, no. 1–2, pp. 315–322, 2016.

  14. C. Ye, J. Xin, Z. Su, L. Udpa and S. S. Udpa, “Novel Transceiver Rotating Field Nondestructive Inspection Probe”, IEEE Trans. Magn., vol. 51, no. 7, p. 6201006, July 2015.